User Manual V1.4
Date: 2011.02.18
4
4.2 Example:
Remark: One power line is included in the package. If you need more cable for I/O connector,
please call.
5. LED Status:
Status
Description
Power LED steadily ON (Red)
Power ON
Power LED blinking (Red, 0.5 sec.)
Low power (Battery)
Power LED OFF
Power OFF
Analog LED steadily ON (Blue)
Analog Input is available
Digital LED blinking when transmitting Blue)
Digital I/O is available
6. Control software
6.1 API: The adapter is built in the API for the software integration. Please check the API
document.
6.2 Zigbee Manager software: The software contains the device management, RS-232
configuration, simple data transmission functions for testing. Please check the software on
CD or website.
7. Transmission mode
7.1 Broadcast: The coordinator will transmit the data to all the end devices without the routers.
No Zigbee manager software necessary. Just power on the adapters with the same PAN ID
and Channel no.. If you need to set multi network, please set the different PAN ID, channel no.
and short address from section 8.3 and 8.5.
7.2. One by one via routers without short address: The coordinator will extend the range to the end
devices.
Digital I/O
Battery power Input
Analog Input
