Uclear WT300, Руководство пользователя

Страница: 25 / 39

25
WT300 Adaptor Button Configuration
Command Action
Power on Press/hold Multi-function 2 seconds
Power off Press/hold Multi-function for 5 seconds
Pairing Device should be switched on.
Press/hold
Multi-function for 10 seconds
Connect to headset Press Multi-function once
Reset Press Reset button once
WT300 Adaptor Status Indicator
State Sequence
Busy Blue blinks fast
Pairing Blue/red blinks alternate slowly
Not connected to
headset Blue blinks slowly
Connected to headset Blue flashes twice at 2-second intervals
Powering down Red blinks 5 times
Low Battery Red blinks 3 times every 3 seconds
Battery Charging Solid red lights up
Battery full Solid blue lights up
M
USIC STREAMING
M
ODE
[A2DP]
MMI Table
For A2DP music streaming mode, the stereo cable must
be plugged in before the device is powered up, otherwise
the WT300 will not enter music mode.