Uclear WT300, Руководство пользователя

Страница: 23 / 39

23
The WT300 Bluetooth adaptor is designed to work with most
Bluetooth stereo headsets. The WT300 can connect to most
audio sources such as MP3 players via the provided stereo cable.
Before you use the WT300 for music streaming, it must be
paired with a Bluetooth stereo headset or headphone.
Pairing as Music Adaptor
Power on the WT300 adaptor first.
For pairing instructions for the headset, refer to your headset
manual.
 Put the Bluetooth headset or headphone into pairing mode
(refer to headset owner’s manual for pairing instructions).
 Then connect your WT300 Bluetooth adaptor to the audio
device with the provided stereo cable. Note: To ensure a
weatherproof seal, insert the stereo cable end with 3 ridges
into the WT300.
 While the WT300 adaptor is still on, press and hold the
Multi-function button for about 10 seconds until status
indicator blinks blue and red alternately. (After 5 seconds
you will notice the red light blinks a few times, please ignore
it and continue to hold the button)
 The status indicator will blink blue twice upon pairing
successfully.
It is recommended after the successful pairing process to
power off your WT300.
M
USIC STREAMING
M
ODE
[A2DP]
Pairing