Uclear WT300, Руководство пользователя

Страница: 11 / 39

11
To complete setup of the system, follow the steps below.
Step 1: Link the walkie talkie to the WT300
 Choose the right walkie talkie cable supplied (WC-10, WC-
11, WC-12) which is compatible with your walkie talkie.
 Connect walkie talkie cable to the WT300 by inserting the
mini-USB end into the WT300 and the 2.5mm/3.5mm audio
jack into the walkie talkie.
 Set the walkie talkie volume to mid-range. Please refer to
Walkie Talkie Volume Setting section .
Before going to Steps 2 & 3, the WT300 and UCLEAR headset
must be turned on.
Step 2: Link the PTT remote control to WT300 adaptor
 Press the PTT button to attempt connection if no link has
yet been established. The indicator of the remote control
will blink blue fast while it is busy connecting. The flashing
light will go off once it is connected.
 To talk, press and hold the PTT button. Indicator will turn
solid blue. The WT300 status indicator will turn red during
talk.
 Note that the blue LED light of the WT300 is always flashing
when the WT300 is on.
The blue LED light of the WT300 flashes at 2 second
intervals when the device is on.
The red LED on the WT300 indicates PTT operation.
!
U C
LEAR
H
EADSET
[C
OMMUNICATION
M
ODE
]
Quick Setup