47
48
6.8.3 6.8.4 HELP
Press “HELP” to display the screen below.
SWIFT KF4-EN, Rev.C 64
6.8.4 Help
Press
“
HELP
”
to display the screen below.
ITEM
DESCRIPTION
THE NAMES OF PARTS
Names of each component on the KF4.
CLEAN AND INSPECT
Cleaning and inspection method.
WARNINGS
Important warnings.
A/S CONTACT LIST
Contact information for warranty.
ITEM
DESCRIPTION
The names of parts
Clean and inspect
Warnings
A/S contact list
Names of each component on the KF4.
Cleaning and inspection method.
Important warnings.
Contact information for warranty.
ERROR MESSAGES
7.1
|
TOO DIRTY FIBER
Error message generated when the fi ber prepared for splicing contains foreign substances that exceed a
normal level.
SOLUTION:
Repeat splice after cleaning the fi ber.
7.2
|
REPLACE FIBER
Error message generated when the fi ber is not located properly or there is a foreign substance on the object
lens or refl ector.
SOLUTION:
Press and reposition fi ber again. Clean the object lens and refl ector.
SWIFT KF4-EN, Rev.C 65
7.
Error Messages
7.1.
Too dirty fiber
Error message generated when the fiber prepared for splicing contains foreign substances that
exceed a normal level.
Solution: Repeat splice after cleaning the fiber.
7.2.
Replace fiber
Error message generated when the fiber is not located properly or there is a foreign substance
on the object lens or reflector.
Solution: Press
and reposition fiber again. Clean the object lens and reflector.
SWIFT KF4-EN, Rev.C 9
3.
Product Outline
3.1.
Function buttons
BUTTON
DESCRIPTION
Press and hold about 1 second to turn the power on/off.
Move the cursor to the left.
Move fiber to manual mode and adjust the camera’s focus.
Stripping popup menu should load.
Move the cursor to the right.
Move fiber to manual mode and adjust the camera’s focus.
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C 65
7.
Error Messages
7.1.
Too dirty fiber
Error message generated when the fiber prepared for splicing contains foreign substances that
exceed a normal level.
Solution: Repeat splice after cleaning the fiber.
7.2.
Replace fiber
Error message generated when the fiber is not located properly or there is a foreign substance
on the object lens or reflector.
Solution: Press
and reposition fiber again. Clean the object lens and reflector.
