41
42
6.6.3 ELECTRODES CAUTION
The number of electrodes used is set on this menu. It is recommended that electrodes be replaced when the
number of arcs reaches 38,000.
The number of times is the maximum number possible in the optimal environment. Depending on your work
environment, it may be possible to use more electrodes than the default number of times.
6.6.4 NUMBER OF ELECTRODES USE
Indicates the number of electrodes used as counted up to the present time.
SWIFT KF4-EN, Rev.C 57
6.6.3 Electrodes caution
The number of electrodes used is set on this menu. It is recommended that electrodes be
replaced when the number of arcs reaches 4000.
The number of times is maximum number possible in the optimal environment.
Depending on your work environment, it may be possible to use more than the default number of
times.
6.6.4 Number of electrodes use
Indicates the number of electrodes used as counted up to the present time.
SWIFT KF4-EN, Rev.C 57
6.6.3 Electrodes caution
The number of electrodes used is set on this menu. It is recommended that electrodes be
replaced when the number of arcs reaches 4000.
The number of times is maximum number possible in the optimal environment.
Depending on your work environment, it may be possible to use more than the default number of
times.
6.6.4 Number of electrodes use
Indicates the number of electrodes used as counted up to the present time.
6.7
|
SETTING
Display the setting mode by pressing and then select “SETTING” menu with the button.
6.7.1 LANGUAGE
A screen to select a language is displayed.
6.7.2 DATE
A screen to set the time and date is displayed.
SWIFT KF4-EN, Rev.C 9
3.
Product Outline
3.1.
Function buttons
BUTTON
DESCRIPTION
Press and hold about 1 second to turn the power on/off.
Move the cursor to the left.
Move fiber to manual mode and adjust the camera’s focus.
Stripping popup menu should load.
Move the cursor to the right.
Move fiber to manual mode and adjust the camera’s focus.
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C 9
3.
Product Outline
3.1.
Function buttons
BUTTON
DESCRIPTION
Press and hold about 1 second to turn the power on/off.
Move the cursor to the left.
Move fiber to manual mode and adjust the camera’s focus.
Stripping popup menu should load.
Move the cursor to the right.
Move fiber to manual mode and adjust the camera’s focus.
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C 58
6.7.
SETTING
Display the setting mode by pressing
and then select “SETTING” menu with the
button.
6.7.1 Language
A screen to select a language is displayed.
SWIFT KF4-EN, Rev.C 58
6.7.
SETTING
Display the setting mode by pressing
and then select “SETTING” menu with the
button.
6.7.1 Language
A screen to select a language is displayed.
SWIFT KF4-EN, Rev.C 59
6.7.2 Date
A screen to set the time and date is displayed.
6.7.3 Power save
The power save feature is used to customize power consumption to maximize battery life.
