background image

Tapping on "OK" will save the settings as displayed, while tapping on 
"Cancel" will leave the settings unchanged. 

• 

Close Button

 

Tapping on Close Button will make the 

PenSigner

 Toolbar disappear.  

   

• 

Pen Button

 

Tapping on Pen Button provides you with a hard-tipped pen to freely draw on 
the screen.  The Pen leaves a trace with a fixed width and in a color as shown 
on the Expanded Toolbar.  

PenSigner

 remembers the last width and color for 

this Pen, separate from those for Brush.  
   

• 

Brush Button

 

Tapping on Brush Button provides you with a soft-tipped pen to freely draw 
on the screen.  The Brush leaves a thicker trace as you apply more pressure to 
Pen Tip, and you can adjust the normal width of the tip by moving the Pen 
Width Slide.  The color is as shown on the Expanded Toolbar.

   PenSigner

 

remembers the last width and color for Brush, separate from those for Pen.  
   

• 

Undo Button

 

When you tap on Undo Button, the last stroke you made is removed.  A stroke 
is the trace left on the screen from the time Pen Tip touches Tablet Plate till 
the time Pen Tip is lifted from the Plate.  
   

• 

Clear Button

 

When you tap on Clear Button, all trace left on the screen is removed, as if 
you just pressed Pen or Brush.  
   

• 

OK Button

 

When you tap on OK Button, the entire trace is first copied to system 
Clipboard, similar to the action taken when you select Edit/ Copy with an 
editor program (or pressing Control-C with many applications) .  The contents 
of Clipboard is then copied to Target Window as if you selected Edit/Paste (or 
pressed Control-V with many applications).  

Target Window is the window that was last active right before you tapped OK 
Button.  You may choose which window the drawing is to be inserted into by 
tapping on the window before you tap on OK Button.  

Note:

 

 If for some reason your drawing appear to be lost after you tap on OK 

Button, immediately choose the correct window to receive your drawing and 
select Edit/ Paste (or press Control-V on the keyboard).  If this does not work, 
either the application program does not accept graphs or it expects a key 
combination other than Control-V.    

• 

Cancel Button

 

When you tap on Cancel Button, the drawing you have made so far is 
discarded, and the Toolbar is returned to unexpended state.  If you have 
changed Settings with "Send then close this appl" checked, 

PenSigner

 will go 

Содержание UCWPENX





























































Отзывы: