The Hot Cells Configuration Page
You use the Hot Cells Page to define a number of Hot Cells on Tablet Plate so that
you can trigger a pre-defined action by tapping on a Hot Cell. The Hot Cells are small
areas around Pen Area. You first reserve up to four Hot Edges surrounding Pen Area,
and in each Hot Edge you can assign actions to Hot Cells in it. In the figure below, the
gray area in Hot Pad Layout indicates the maximum Pen Area.
Figure 14 The Hot Cells Configuration Page
•
Hot Pad Layout
This area indicates the current size of Pen Area, and each blue rectangle
indicates a Hot Cell. You can view and modify the contents of each Hot Cell
by first tapping on a rectangle.
•
Hot Edges
You can choose up to four Hot Edges around Pen Area to use Hot Cells. When
a Hot Edge is selected, the size of current Pen Area is reduced accordingly. If
you choose no Hot Edge at all, Hot Cells function is turned off.
•
Hot Cell Contents
The area beneath Hot Pad Layout shows the Label of the currently selected
Hot Cell and its Associated Action. In the figure above, the selected Hot Cell
