UBTECH Sensor-controlled safety sign USER MANUAL
UBTECH ROBOTICS CORP LTD
If Sensor-controlled safety sign works abnormally, especially when you detect
unusual sounds, smells or smoke, please take precautions and immediately turn off the
power, remove the battery, and contact the technical support center.
Part 3 Device System Operation
When the disinfection equipment is worked indoors, the UV light will cause harm to
the human body, so it is necessary to place the Sensor-controlled safety sign outside the
room to warn the personnel not to approach. At the same time, as an accessory product,
the Sensor-controlled safety sign needs to work with the disinfection equipment, which
can intelligently feedback the various states of the disinfection equipment. Use the
Sensor-controlled safety sign according to the following steps:
Step 1
Install 8*AA batteries
Step 2
Place the Sensor-controlled safety sign at the door of the room to be
disinfected, and turn on the Sensor-controlled safety sign switch
Step 3
Through the web software to match the Sensor-controlled safety sign with the
designated disinfected equipment
Step 4
After disinfection, close the Sensor-controlled safety sign
Part 4 Sensor-controlled safety sign
Services
Basic features
：
No. Feature Description
1
Caution
Sensor-controlled safety signs are used to
remind people not to enter the room to be
disinfected
2
Switch
Power on
Power on the Sensor-controlled safety sign
Detection
switch
Turn on Intrusion Detection
Pairing switch
Bluetooth pairing mode switch
3
Disinfection
State Indicator
State feedback
Indicate the status of disinfection device
paired with the Sensor-controlled safety sign,