NINA-B2 series - System integration manual
UBX-18011096 - R05
Software
Page 16 of 35
C1- Public
3.
Prepare the module to accept a binary file for download and start the bootloader at the
appropriate baud rate. Enter the Update software
AT+UFWUPD
command together with the
Connectivity Software values defined in the
NINA-B22X-CF-<version>.json
file and the signature
in the
NINA-B22X-SI-x.x.x-xxx.txt
file. The bootloader must be running when the software is
“sent” to the module in the next step. Note particularly that
<mode>=0,
<name>=ConnectivitySoftware,
and
<flags>=rwx.
NINA-B2 returns a series of “
C
” characters for as long as the bootloader is running. The XMODEM
download is ready to begin from the host.
4.
While the bootloader is running, send the u-connectXpress
NINA-B22X-SW-4.0.0-0.003.bin
file
to NINA-B2.
5.
Once the binary file has been sent, NINA-B2 displays the greeting text
+STARTUP
. Enter the
Software version identification
AT+GMR
command again to make sure that the latest software
version is now installed.
For more information about the parameters, see the Software update
+UFWUPD
command in
u-connectXpress AT Commands Manual [1], u-connectXpress bootloader protocol specification [8],
and u-connectXpress user guide [5].
AT+UFWUPD=0,115200,0,651840,jzlRIkg37ir/pVpDKVrPot2ZdsaNvUtSYP2pDAUVJc7iQI9yzIo8VF
v8C1olP/9I4UJ4WmgC5oRay4AC0V8jRJSFFX/wop6x/sBJGOeDEu7yC/s0+Oj7CLs4TzNbiRqK0zLwKRiH
ohgVyzWqhwKFpmcxcDXphjkCTIvpffY8TwDLzkosQCueJtBHBg9KDB3TOs8bsXLaVtT2x1rLfM
g8/pb+BPQEK9NcNB4hbp693ATivYE3cmxzWykIjEje819SIRGhHFt0wAsqh7WFgSJYNgDir1+j
7+l4RqrMl/A/QYyWS9z0Q15QcJ3GlAJlXYa5v/ISjA==,nina-b2-debug,rwx
CCCCCCCCCCCCCCCCCCCCCCCCCC
+STARTUP
AT+GMR
"4.0.0-003"
OK