C099-F9P - User guide
UBX-18063024 - R12
Introduction
Page 5 of 40
C1-Public
1
Introduction
The C099-F9P board is a convenient tool that allows customers to become familiar with the u-blox
ZED-F9P high precision GNSS module. The board provides facilities for evaluating the product and
demonstrating its key features. The C099-F9P application board offers:
•
A ZED-F9P module for use as an RTK rover or reference station
•
An ODIN-W2 short-range module with Arm®
Mbed™ firmware
tailored for C099-F9P usage to
provide untethered operation using Bluetooth and Wi-Fi which are configurable via a command
line interface (CLI)
•
Power supply options comprising a USB connection, Li-Po (lithium polymer) cell with recharging
ability, and 6-12 V DC input
•
Small, lightweight board (110 x 55 mm) with Arduino R3/Uno shield connections for host
expansion
This User guide describes the following use cases:
1.
Base and rover operation via serial connectivity
2.
Rover operation via Bluetooth Classic (with ODIN-W2 Mbed FW)
3.
Rover operation via Wi-Fi (with ODIN-W2 Mbed FW)
4.
Base and rover operation via Wi-Fi (with ODIN-W2 Mbed FW)
This user guide is split into several useful sections, including:
•
Section 2:
C099-F9P quick start provides information on how to get C099-F9P up and running
straight out of the box.
•
Section 3: C099-F9P description identifies the board’s facilities.
•
Section
Using the C099-F9P provides a comprehensive guide for in-depth usage.
•
Section 5:
Rover operation using NTRIP shows different ways of connecting to an NTRIP service.
•
Section 6: Wireless communication describes the use case of connecting base and rover boards.
•
Section 7:
Firmware update provides instructions for updating the firmware of the ZED-F9P high
precision GNSS module as well as the ODIN-W2 short-range module.
•
Section 8: Arduino header connections provides mechanical specifications for Arduino R3/Uno.
•
The sections in the Appendix provide information on how to upload the ODIN-W2 firmware via
JTAG, C099-F9P antenna schematics, and C099-F9P mechanical board dimensions and
schematics.
1
The Mbed FW shall be used only with a C099-F9P kit.
2
S-center usage is not required nor supported by the CLI.
3
The C099-F9P kit does not contain a battery or mains power adapter.
Содержание C099-F9P-0-03
