WWDZWx User Manual
Date:9-Jun-2021
Ubitech Ltd.
Version:0.3
9
8
HOW WATER LEAK SENSOR WORKS
8.1 Water Detection Probes
-
Custos WWD supports two Water Detection Probes “Built-in & Remote”,
8.2 Built-in Water Detection Probe
-
WWD has special recess “Figure 8A” which helps induce Water run through it, to create effective detection by probes from
both end
-
To achieve better result, please put the WWD on the floor flatly.
8.3 Remote Water Detection Probe
-
To make sure Sensor Probe works properly show as below pictures, please make sure insert the Remove Sensor Probe
tightly “Figure 8B” and there is no any gap allowed “Figure 8C” between 3.5mm jack and housing.
Water will be induced to go thru this tiny
groove to activate detection whenever
water approach here.
Figure 8A
Figure 8B
Figure 8C
