BVS-ZWx User Manual
Date:02-APR-2020
Ubitech Ltd.
Version: 0.9.4
Page: 18
8
WORKING MODE SUPPORT
8.1
Standalone Mode
-
Support Water Valve Operation, Water Leak detection & Alarm, Inclusion, Exclusion and Factory Default Reset.
-
By default, Custos BVS is in Standalone Mode with Factory Default Setting and it’s not belonged to any Z-Wave Mesh
Network.
-
End user can enjoy all regular functions without Z-Wave benefit. Such as Water Valve, Leak detection by Local Leak
Sensor Probe.
8.2
Mesh Network Mode
-
Support Smart Start, Classis Inclusion, Exclusion & Factory Default Reset.
-
After Adding Custos BVS to a Z-Wave Mesh Network, end-customer can fully enjoy all functionalities, such as remote
control, associate with other Z-Wave end devices…
8.3
Water Valve
-
Support OPEN, CLOSE, PAUSE
-
RESUME during OPEN/CLOSE operation.
-
Auto-calibration position of valve handle. (Only support operate by Touch Sense Button)
-
Water Valve will be closed automatically once Local Water Leak Sensor Probe is triggered.
-
Water Valve can be triggered with associated other Z-Wave end-devices. (Only in Mesh Network Mode)
8.4
Water Leak Sensor & Alarm
-
Water Leak Alarm will be activated and to CLOSE Water Valve automatically once Local Water Leak is detected.
-
Once Local Water Leak is detected then Custos BVS will also send out Water Leak Alarm with no location support to
Z-Wave Gateway. (Only in Mesh Network Mode)
8.5
Temperature Sensor
-
By default, BVS sends temperature report automatically to gateway when every 1
°C
or 1.8
°F
degree changed. (Only in
Mesh Network Mode)
