Ubisys S1, Справочное руководство

Страница: 31 / 40

31 www.ubisys.de
u
0x0021 key128,
persistent gpSharedSecurityKey
The 128-bit AES-CCM* key that is being used to secure Green Power data frames
0x0022 key128,
persistent gpLinkKey
The 128-bit AES-CCM* key that is being used to deliver keying material to Green Power
devices
Cluster commands supported:
Command Description
0x00
GP Notification
Tunnels GP frames from a Green Power Device to one or more sinks or groups of sinks
0x04 GP Commissioning Notification
Tunnels GP frames from a Green Power Device to a sink in commissioning mode
0x05 GP Sink Commissioning Mode
Makes the sink enter or leave commissioning mode for a particular endpoint or all endpoints
0x09 GP Pairing Configuration
Creates, updates or removes pairings by modifying the sink and translation table entries accordingly
0x0A GP Sink Table Request
Allows to query the sink table for a certain Green Power Device or read out the table in chunks
Cluster commands transmitted:
Command Description
0x01 GP Pairing
Creates, updates or removes proxy table entries
0x02
GP Proxy Commissioning Mode
Makes the proxy enter commissioning mode for a particular sink, or leave commissioning mode
0x06
GP Response
Tunnels GP data frames from a sink to a bidirectional Green Power Device
0x0A GP Sink Table Response
Conveys a set of sink table entries to a management application
7.8.1.1. Green Power Device Interaction
Commissioning a Green Power Switch
The S1(-R) can be put in commissioning mode either by using a suitable commissioning tool (for
example the ubisys Network Manager) or by instigating Finding & Binding as a target. Once in
commissioning mode, the device is ready to pair with Green Power switches.
Supported Device Types
The power switch can be paired with the following pre-defined Green Power Device types:
Device Type Description
0x02 On/off Switch
Default command set: on, off and toggle commands
0x07 Generic Switch
Default command set: press and release (up to eight buttons)
In addition, any Green Power device that sends at least one of the supported commands listed in the
next section can also be paired with the dimmer.