Pole
Note:
If you are mounting the camera outdoors, it must
be installed in the upright position to prevent water
from getting into the base of the camera. Use the
Outdoor Cover for additional protection from moisture.
1. Attach the Pole Mount to a pole using the included Zip Ties.
2. Insert and pull an Ethernet cable through the back port
opening of the Outdoor Cover.
Note:
When using the Outdoor Cover, use an Ethernet
cable without strain‑relief boots on the connector. This
will prevent unnecessary tension on the cable ends.
3. Connect the Ethernet cable to the Ethernet Port on the
G3 Flex camera.
