
39
Chapter 10: Access Point Details
UniFi
™
AP-Outdoor User Guide
Ubiquiti Networks, Inc.
Forget this AP
Forget
Click to remove the Access Point from
management by the UniFi Controller software and to
restore it to factory default settings.
Note:
Use caution when clicking
forget
. This will
restore the Access Point to factory settings when in a
Connected
state. Do not use the
Forget
option when
the Access Point is in an
Isolated
state. If you do, the
only way to make the Access Point accessible from
the UniFi Controller is to take it down and connect
by wire.