Install the LED Panels and Dimmer Switches
For each UniFi LED Panel or Dimmer Switch:
1. Remove the MAC Sticker from the back of the device by
carefully peeling back and pulling the blue tab.
OR
2. Place the sticker on the QR Code Log sheet that matches
the device’s location.
Site:
Controller:
QR Code Log
UDIM-AT-XXXXXX
arrows and place them on this QR Code Log.
ULED-AT-XXXXXX
OR
Site:
Controller:
QR Code Log
UDIM-AT-XXXXXX
arrows and place them on this QR Code Log.
UDIM-AT-XXXXXX
3. Install the device as decribed in the Installation section of
the device’s Quick Start Guide.
