Quick Setup
This section describes the Quick Setup procedure for
installations with large numbers of UniFi LED Panels and
Dimmer Switches. The Quick Setup requires using the UniFi
LED app along with a QR Code Log that you create. Each UniFi
LED Panel or Dimmer Switch has a removable MAC Sticker on
its reverse side; this has a QR code used to scan the device’s
MAC address. The Quick Setup consists of these steps:
• Create the QR Code Log
• Install the LED Panels and Dimmer Switches
• Scan the QR codes
Create the QR Code Log
1. Download the QR Code Log template at:
ubnt.link/QR-Code-Log
2. Print out as many copies as needed (each sheet can log up
to 16 LED Panels and 3 Dimmer Switches).
Site:
Controller:
QR Code Log
UDIM-AT-XXXXXX
arrows and place them on this QR Code Log.
3. Fill in the Site (such as “1st Floor Meeting Room”) and
Controller (such as “UniFi LED Controller”) on each sheet.
