23
Host Name
Host Name is the system wide device identifier. It is reported by SNMP Agent to
authorized management stations.
Figure 27 - Host Name Configuration
Host Name:
specify the system identity.
Click
Change
button to save the changes.
Administrative Account
In this section you can modify the administrator password to protect your device from
unauthorized configuration. The default administrator’s password should be changed on
the very first setup:
Figure 28 - Change Administrator Settings
Administrator Username:
displays name of the system user. The username is not
configurable parameter, so it cannot be changed.
Current Password:
enter a current password value. Default administrator login
credentials:
User Name:
ubnt
Password:
ubnt
New Password:
enter a new password value used for administrator authentication.
Verify Password:
re-enter the new password to verify its accuracy.
Click
Change
button to save the changes.
Logo Customization
Use this section to enable and upload your custom logo on the device user interface.
The logo must conform to these limitations:
The size limit of the logo is 50Kb.
The maximum height of logo should be 70 pixels.
Only .gif format images are accepted.
