Ubiquiti airFiber AF-5, Быстрый старт

Страница: 7 / 32

AF-5, AF-5U Quick Start Guide
https://dl.ubnt.com/qsg/AF-5_AF-5U/AF-5_AF-5U_EN.html[2/17/2020 12:42:26 PM]
2.
3.
airFiber Configuration
This section explains how to access the airFiber Configuration Interface and configure the
following settings:
Wireless Mode Configure one airFiber radio as the Master and the other as the Slave.
Duplex The airFiber radio supports both half-duplex and full-duplex operation. Half-
duplex operation provides more frequency planning options at the cost of higher latency
and throughput. Full-duplex operation provides the highest throughput and lowest
latency; however, you have fewer frequency management options.
Half Duplex (default) The TX and RX Frequencies can be the same or different to suit
local interference.
Full Duplex The TX and RX Frequencies should be different.
TX and RX Frequencies The TX Frequency on the Master must match the RX Frequency on