Ubiquiti airFiber AF-5, Быстрый старт

Страница: 23 / 32

AF-5, AF-5U Quick Start Guide
https://dl.ubnt.com/qsg/AF-5_AF-5U/AF-5_AF-5U_EN.html[2/17/2020 12:42:26 PM]
GPS and Master LEDs are solidly lit
Note: The GPS LED may not be lit if there is a weak GPS signal. A GPS signal is not
required for alignment.
Link Status LED flashes (Normal Flash 1:1)
Remote and Local LED Displays show a double dash
Note: The Local LED Display may briefly flash a large number (such as 95) when there
is no link.
Establishing a Link
Adjust the positions of the Master and the Slave to establish a link.
Note: The Master must be aimed first at the Slave because the Slave does not
transmit any RF signal until it detects transmissions from the Master.
1. Ensure that the following bolts and nuts are loose:
Four Pre-Installed M10x25 Flanged Bolts on the airFiber radio (two on each side)
Four M10 Hex Nuts used to lock the elevation alignment on the Upper Mount Bracket
(two on each side)