airFiber Configuration
The instructions in this section explain how to access the
airFiber Configuration Interface and configure the following
settings:
•
Wireless Mode
Configure one AF‑11FX as the Master and
the other as the Slave.
•
Frequency Setting
The TX Frequency and RX Frequency
settings must be the reverse of each other on both the
Master and the Slave.
1. Connect an Ethernet cable from your computer to the
MGMT port on the AF‑11FX.
2. Configure the Ethernet adapter on your computer with a
static IP address on the 192.168.1.x subnet.
3. Launch your web browser. Type http://192.168.1.20 in the
address field and press enter (PC) or return (Mac).
