ubicquia UbiCell UG CAT-M, Руководство по установке, Страница: 5 / 7

© Ubicquia, Inc. All rights reserved. Uncontrolled if printed. Information contained herein is CONFIDENTIAL &
PROPRIETARY INFORMATION OF UBICQUIA, INC., and may not be copied or reproduced in whole or part, nor
disseminated to others, without the express written approval of Ubicquia, Inc.
2060 | rev2 | Client Use Approved
4
Installing the UbiCell
For a more detailed demonstration of
UbiCell installation, watch the
UbiCell
Installation Video .
STEP 1 Check NEMA Receptacle
Check that all contacts on the NEMA
receptacle are clean. Check that the
NEMA receptacle does not rotate. If
the receptacle rotates, ensure it is
locked in place before installing.
NOTE: If the receptacle cannot be
locked in place, then it must be held in
place during UbiCell installation.
STEP 2 NEMA Connector Options
Decide which NEMA option diagram
is applicable to the unit and install.
NOTE: See page 6 for NEMA connector
options.
STEP 3 Install the UbiCell
Insert the UbiCell into the NEMA
socket and
apply downward
pressure while turning clockwise
about 15 degrees until rotation
completely stops.
NOTE: Optimal communication can be
achieved with a 10ft / 3m minimum
obstruction clearance around the
device.
NOTE: Watch the
NEMA Connector
Types video for a demonstration on
preparing the NEMA receptacle for
installation.
~
10 lbs
~ 15°