UBI EasyCoder 101, Руководство для стартапов

Страница: 5 / 22

5
UBI Shell 4.0 Standard – Startup Manual
USING UBI SHELL
Starting Up with UBI Shell
A few seconds after you have turned on the power to the printer, the
countdown menu of the UBI Shell program will be displayed:
PRINT=UBI SHELL
5 sec. v.4.0
Now you have 5 seconds to enter UBI Shell by pressing the
< Print > key with the printhead lowered (the printhead should
always be lowered at startup).
Provided you have a working two-way communication with a
terminal program in a host computer, you may – as an alternative –
enter the Terminal Setup by transmitting “TTT” or “ttt” to the
printer. The Terminal Setup is described in a separate chapter later
on.
The lower line keeps you informed how much time you have left.
Should the time run out before you have taken any action to enter
UBI Shell or the Terminal Setup, the last selected application in UBI
Shell will be opened. This implies that if you use the same
application all the time, you will only need to turn on the power,
once the application has been selected.
If no other application has been selected yet, the default choice will
be displayed when the countdown is completed, e.g.:
UBI FINGERPRINT
6.0
This message means that you have entered the immediate mode of
UBI Fingerprint with "uart1:" selected as std I/O channel (see UBI
Fingerprint manuals).
If you want to enter another application, just turn off and on the
power and enter UBI Shell before the countdown is completed.
If you enter the UBI Shell from the countdown menus (Head Down/
Press Print), the Select Application menu will be displayed:
UBI SHELL
SEL. APPLICATION
In this menu, you can choose between three options:
• Go to a stack of menus, where you can select an application
program, by pressing < Print > without lifting the printhead.
• Go to the Facilities part of UBI Shell by lifting the printhead and
pressing < Print >.
• Start the Terminal Setup program by transmitting “TTT” or “ttt”
from the host.
Continued!