Ubert RoFry RF-300-CC, Руководство пользователя

Страница: 18 / 31

18 Maintenance
printed: 07/2023 Subject to change!

RoFryUserManual.docx
Unlock and open the door / Remove basket-holder, lamella-sheet, strainer
Remove crumbs from gaskets and bottom of chamber, empty strainer
Insert st lamella sheet, insert basket-holder
Close and lock the door
Insert basket completely
Program runs until signal sounds
Remove basket completely
Unlock and open the door / Remove basket-holder, lamella-sheet, strainer
Empty strainer / wipe gaskets thoroughly
Insert st lamella sheet, insert basket-holder
Close and lock the door
Insert basket completely
Program runs off to signal, RoFry® jumps back to home screen
6.3 Weekly Cleaning
Beside the daily cleaning the following items need some special care on a weekly basis:
Leave current frying-program by pressing the back key
Enter cleaning mode by CLEANING key
Select a program CLEAN 2
– CLEAN 6
RoFry® cools down for approx. 15-20 min. (half open the basket to speed up the cool down!)
Unlock and remove basket completely
Unlock and open the door and switch off RoFry® completely at the main switch
6.3.1 Flap
Clean the area around the flap as well as the air intake and exhaust channel
thoroughly.
6.3.2 Sliders
Clean the groove in both sliders of the basket holder with a flat screwdriver
thoroughly to ensure easy sliding of the basket.
6.3.3 Particle separator (lamella sheet)
Use the lime remover to thoroughly decalcify the bottom side of the lamella
sheet.