background image

Feil! Stil er ikke definert.

 5 

2.2  Warranty and Liabilities 

Fundamentaly our "General terms of sale and delivery" count. These are known to the operator at 
the latest since signing of the contract. Claims to warranty and liability at persons- and property 
damages are impossible, if they are to be led back to one or serveral of the following causes: 

• 

Non due use of the unit. 

• 

Improper assembling, starting up, operating and servicing of the unit. 

• 

Operating the unit with defective safety devices or safety devices which have not been installed 
properly and are in no working condition. 

• 

Disobeyment of the references in the operating manual concerning transportation storage, instal-
lation, start-up, operation, maintenance and assembling of the unit. 

• 

Unauthorized mechanical or electrical changes of the unit. 

• 

Unsufficient maintenance of wear and tear parts. 

• 

Unauthorized repair. 

• 

Force of nature and act of god. 

2.3  Symbols and Notes 

In the operating manual the following symbols and signs are used: 

This symbol means a possibly or directly threatening danger for the life and the 
health of persons and/or a possibly dangerous situation. 

Ignoring of these references may result in consequences for your health and/or 
can lead to property damages !

 

 

 
This symbol points to important references for the proper use of the unit. 

Not paying attention to these references can lead to disturbances at the unit or in 
the environment !

 

 

 
This symbol points to operation tips and especially useful information.  

Help to use all functions at your unit optimally 

 

2.4  Copyright 

The copyright on this operating manual remains at the company UBERT GASTROTECHNIK GMBH. 
This operating manual is intended only for the operator and his personal. It contains instructions and 
references which neither completely nor partially: 

• 

be duplicated 

• 

be circulated or 

• 

be otherwise made available to third parties. 

Offences may violate applicable laws. 

printed: 03/2010  Subject to change! 

 

 GourmetLineUserManualDKTG 

Содержание DKT 31





















Отзывы: