6
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR WINE COOLER
•
Remove the exterior and interior packaging materials.
•
Check to be sure you have all of the following parts:
Model WCV42DZ
Dual Zone Wine Cooler
10
Wine Bottle Shelves (Wire)
2
Wine Bottle Shelf / Basket (Wire)
•
Before connecting this appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION OF YOUR WINE COOLER
•
This
appliance is suitable for an either free-standing or built-in (fully recessed) installation.
•
Place your wine cooler on a floor that is strong enough to support it when it is fully loaded. To
level your wine cooler, adjust the front levelling legs located at the bottom of the appliance.
•
Locate the wine cooler away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also prevent the unit from performing
properly.
•
Avoid locating the unit in damp areas.
•
Plug the wine cooler into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third prong (ground) from the power cord. Any questions
regarding power and/or grounding should be directed towards a certified electrician.
BUILT-IN CABINET INSTRUCTIONS
This
appliance is suitable for an either free-standing or built-in (fully recessed) installation.
If you plan to use this unit in a built-in application please follow the requirements shown
below.
Cabinet Opening Dimensions
IN (min)
CM (min)
Width
24”
61 cm
Depth
24”
61 cm
Height
34 ½”
87.6 cm
