Power Consumption
AMPS
Power Supply
Heat Output
SPECIFICATIONS
Plug into proper 240V, 60Hz, AC source (see
important safeguards regarding use of extension
cords).
Your heater is equipped with the following safety feature:
If the unit overheats, the system will automatically shut the heater off. Make sure heater
is clear of all obstructions. To reset, simply turn the thermostat control to the position,
unplug the heater and wait 15-20 minuts. After the wait, you may resume use of the heater
by re-plugging unit in and turning the thermostat control to the ON position.
ASSEMBLE HANDLE AS SHOWN WITH SCREWS PROVIDED
(See Diagram 1)
OPERATING INSTRUCTIONS
1.
2.
Adjust the thermostat to maximum ( ). Once
the room is comfortable, rotate the thermostat counterclockwise until the
heater shuts off. The thermostat will now maintain the temperature by cycling
the heater on or off.
240 volts AC, 60Hz
20 AMPS
4800 Watts (MAX)
16382 BTU/Hr (Max.)
SAFETY
Overheater Shut-Off:
