2
2
The heater controls are located at the top right corner of the
insert.
Replace with a CR2025 battery and follow the diagram at
the back of the remote handset to install the new battery.
REMOTE CONTROL BATTERY
REPLACEMENT
Press this button once for the flame effect.
The unit will beep. Press again to increase the flame
intensity. There are six light intensities to choose from
The flame optics will go higher under the sequence of
1, 2, 3, 4, 5, and 6. Pressing the button again will stop
the flame effect.
Press this button for the low heat level. The
indicator light will be ON. The fireplace will provide
low heat. Pressing once again will stop the low
heat level function.
Press this button for the high heat level. The unit
will beep. The fireplace heater will provide high
heat. Pressing once again will stop the high heat
level function.
Press this button to turn on the fireplace.
The unit will beep. Press again to turn off the fireplace
and the fan will continue to work for 5 seconds
without heat.
The fireplace is present to start whit high heat (1500W)
and the highest flame intensity.
O/I: Press this button for the main power. The indicator light
will turn on. The fireplace is now ready to operate with the
remote control.
Note: When the O/I switch is turned OFF, the heater functions
will stop even though the other switches are in the ON
position.
MAINTENANCE
WARNING: DISCONNECT POWER AND UNPLUG THE POWER CORD BEFORE
ATTEMPTING ANY MAINTENANCE OR CLEANING TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURIES TO PERSONS.
