22
Troubleshooting
continued
PROBLEM
SOLUTION
When attempting to light my grill, it will not
light immediately.
• Make sure you have a spark while you are trying to light
the burner (if no spark)
• Ensure that the wire is connected to the electrode
assembly.
• Clean wire (s) and / or electrode with rubbing alcohol
and a clean swab. Wipe with a clean cloth.
• Check to see if the other burners operate. If so, check the
gas orifice on the malfunctioning burner for an obstruction.
Regulator makes noise.
• Vent hose on the regulator may be plugged or regulator
may be faulty.
• Ensure the vent hole on the regulator is not obstructed.
Clear the hole, close the gas control valves. Wait ten
minutes and re-start.
• Check your flames for proper performance. If the flames
are not correct, replace regulator.
Full size cover does not fit the grill.
• Cover may be incorrect for your grill. It may be a tight fit.
Ensure the cover is the correct length for your grill.
Measure it left to right. Compare to the grill’s
measurement.
• Compare the location and size of the hood portion of the
cover to your grill.
• Spread the cover and allow it to relax, preferably in warm
sunlight or in a warm room.
• For grill with a side shelf, put on left to right.
BEFORE CALLING FOR SERVICE
If the grill does not function properly, use the following check list before contacting your dealer for
service. You may save the cost of a service call.
Содержание 70005005
