Uberhaus 1861, Руководство оператора

Страница: 5 / 11

5
NOTE:
The display can show the temperature in both °F and °C. To change the temperature scale, press and
hold the + key for a few seconds, then release.
Please be aware that as this display is for information purposes only and not a precision device. The
displayed temperature may slightly vary from the actual temperature.
It is normal for the heater to cycle ON and OFF as it maintains the set temperature.
When adjusting temperature, the set temperature on display will flicker for 5 seconds. In 5 seconds, if
no changes are made, LED lights will stop flickering, display room temperature again.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on
: with the appliance in the OFF position, press the timer button (D) ( ).
The display shows the symbol ( ) and the time remaining before switch-on.
To set the timer, use + and - adjustment buttons (B), then wait a few seconds for the programming to
be set. The display shows the symbol (
) to indicate you have set the timer. When the programmed
time has been reached, the appliance turns on with the same settings it had during the previous
operation.
Delayed shut-off
: with the appliance on, press the timer button (D) ( ). The display shows the
symbol ( ) and the time remaining before shut-off.
To set the timer, use + and – adjustment buttons (B), then wait a few seconds for the programming to
be set. The display returns to show the current settings and the symbol to indicate you have set the
timer. When the programmed time has been reached the appliance shuts off automatically.
If you want to go back to operation without the timer, press the timer button (D) (
) twice. The timer
symbol disappears from the display.
USING THE REMOTE CONTROL
The remote control functions are identical to those on the control panel. See the section “Operation"
on the previous page for a description of the functions.
INSERTING OR REPLACING BATTERIES
- Remove the cover on the rear of the remote control;
- Insert the button battery (model CR/2032/3V) into remote control with the positive pole (smooth
side) facing up.
- Replace the cover.
Safety Features
1. This heater includes an audible alarm to warn that parts of the heater are getting excessively hot.
If the alarm sounds, immediately turn the heater off and inspect for any objects on or adjacent to
the heater that may cause high temperature.
DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING .
2. A thermal overload protector is built-in to prevent overheating.
3. When an overheat temperature is reached, the heater will be automatically shut off. It can only
resume operation when the user resets the unit. (See RESET INSTRUCTIONS below)