11
ASSEMBLY INSTRUCTIONS
11
12
11. Install the protective guard (E).
Hang the 3pcs protective guards on upper
supports, fix them with 3pcs M5x12 screws
and 3pcs
fixing brackets
(GG).
12. Install the reflector (A) with 3pcs studs
(CC), lean the heater carefully and attach
the 3pcs small flat washer Φ8 (BB) on top
of the heater. Put washer on each
stud
and
fasten the reflector with another washer and
wing nut (AA). Return the heater carefully to
upright position.
Hardware Used
AA
BB
x 3
x 6
Small flat
washer Φ8
Wing nut
Hardware Used
DD
GG
x 3
x 3
x 1
Fixing Bracket
PP
Philips
screwdriver
Screw M5 X 12
E
A
AA
CC
BB
GG
CC
x 3
Stud
