4
5
Once the handlebars are straight, retighten the stem
bolts, alternating as you go to prevent damage to the
clamp. Align the marking on the bolt head to achieve
the correct tightness. Torque to 15Nm, if a torque
wrench is available.
2. ASSEMBLY
Before You Start
Under your seat in the Field Kit, you'll
find all the tools to assemble your
2✗2
. Feel free to contact us for help
assembling the bike or scan the QR
code to watch our "How to" video.
2.1 Align the handlebars
Loosen the side bolts on the stem with a 5mm Allen
key. Straighten the handlebars perpendicular to the
front wheel.
2.2 Fit the rear indicators
Unpack the rear indicator lights. Install indicators to
their respective side on the rear light bracket. Check
the orientation – the indicator with a long cable is
fitted to left side, the short cable goes to right side.
Insert the thread through the mount, ensuring the
nut and two washers are on the inside. Lights should
face straight back. Use a 17mm spanner to tighten
the fastening nuts.
2.3 Fit the mirrors
Remove the mirrors from their box. Screw the base
of the mirror arm clockwise into the handlebar
mount approximately 10mm and into the correct
position, but do not tighten.
Using a 14mm spanner, tighten the locking nut to
secure the mirror arm. Slide down the rubber booty.
Repeat for the other mirror. Adjust the mirror angle
from a sitting position to provide maximum visibility.
