CHAPTER 1: Product Introduction
IR Intelligent high-speed dome camera is one high-tech surveillance & control product with high-reso
lution color camera module, omni-direction Pan/Tilt, infrared LED array,multi-functional decoder,CPU
processor and memory chip. The product reduces the connection between system components and the ins-
tallation process, it extremely improve the stability of the system. And it fits different environments no m-
atter indoor or outdoor.7 inch 's profile match with special install mount, arm bracket or ceiling mount can
be selected. This dome with weather-proof design, the housing adopts with PC material which is vandal-
proof,waterproof,aging resistance, anti-acid rain, high temperature resistant and anti-erode.
Characteristics:
Camera specification:
*The speed dome support different integrated camera module including SONY, SANYO.
Powerful Pan/Tilt function:
Preset, Pattern, Swing, Privacy mask, Group and more function
PTZ lens control
OSD Menu
Alarm Function
*Max. 360
/sec high speed Pan/Tilt turning
*Adopted with vector driving technology, Pan/Tilt motions are accomplished in the shortest path. As a re
sult, time to target is reduced dramatically and the video on the monitor is very natural to watch.
*Super slow speed function can be reached by joystick, the lowest speed can touch 0.05
/sec.
*Up to 128 pieces preset point can be memorized. The additional information such as dwell time,label ...
can be set as demand.
*Up to 8 pieces point-to-point auto scan can be memorized. Support proportional shift between zoom and
speed.
*Up to 2 of pattern can be recorded and played back. It can record 200 operation commands.
*Up to 5 pieces GROUP can be stored, the function enable the camera to move repetitively with combin-
ation of Preset or Pattern or Swing. A group contained with Max.10 presets, patterns or swings.
*Max.8 of Privacy masks can be located wherever it is required to protect private life. (Only Sony camera
module support this function)
*Support Schedule function.
*Max. 1024 cameras can be controlled at the same time by RS-485 bus communication.
*Pelco-D, Pelco- P protocol can be selected.
* The situation of camera can be displayed on screen with OSD menu function. The detailed camera func-
tion also can be set with OSD menu.
*The information of camera series number, Pan/Tilt position, alarm in/out, preset all can be shown on sc-
reen or not with OSD menu setup;
Built-in 4 channels input function.
If anyone alarm detector was activated then camera can auto move to preset that beforehand setup.
¡ã
¡ã
1
Product Introduction
