Chapter 5:User Manual of The Controller
All the functions of IR high speed dome camera can be achieved through the control by keyboard. Be-
cause the detailed operation from different company is different, if the control system is from other comp
any,please control the dome according to the instruction from control system supplier. Some special fun-
ctions of high speed dome ask special operation , please connected with the control system supplier for de-
tailed operation way.
(We suggest choosing our controller with dome camera that can help you to get more function)
For the following description, control way is the same, no matter what protocol to be selected. Like Pleco-
D, Pelco-P !
5.1 Communication Protocol Selection
After connection of all together, the communication protocol selection will be show on the screen when
you press
The protocol definition as bellow:
”F4”.
PELCO P protocol
9600bps
PELCO D protocol
2400bps
“
Pelco-P”
“Pelco-D”
The above definition is the switchover order for communication protocol according to the order of press-
ing on the
key .
“F4”
5.2 Camera Selection
Selecting any camera: Just input [255] address number, then input [CAM].
Selecting next camera: Input [+1], then the next camera be selected.
Selecting last camera: Input [-1], then the last camera be selected.
I.E. To Select No.2 camera:
Input [2], then input [CAM], the No.2 camera be selected; After No.2 camera be selected, input [+1], the
No.3 camera be selected; If we want to select No.1 camera after NO.2 camera be selected, just input [-1],
then the No.1 camera be selected;
5.3 P/T/Z Control
Input the camera series number which one you want to control.
Input [ZOOM+], [ZOOM-], [FOCUS+],[FOCUS-] or just move the joystick to control pan/tilt and lens
control
I.E. Control No.2 P/T/Z camera:
Input [2] + [CAM], then using joystick to move pan/tilt to the wanted position------input [ZOOM+],
[ZOOM-], [FOCUS+],[FOCUS-] to control dome camera.
8
User Manual of The Controller
5.4 Setup of P/T/Z Preset Points:
Select wanted camera, then use joystick to move the camera to appointed position.
Input [F1] + [8];
Input you wanted series number for this preset point ( from 1 128 );
Input [ PRE], then one preset point be established.
