U.S. Solid USS-SS00002, Инструкция по эксплуатации

Страница: 18 / 20

18
solder onto the soldering iron tip while rubbing it until the tip is
completely coated with solder. If the tip is too severely oxidized
beyond cleaning, replace it with a new one.
2. DO NOT use metal files to remove the oxidization on the soldering
iron tip. If the soldering iron tip deforms or rusts, replace the tip with a
new tip.
3. DO NOT apply excessive force on the soldering iron tip when
soldering. Doing so will not only damage the tip but also not improve the
heat transfer.
4. When placing the soldering iron back in the holder to idle after a
high-temperature operation, adjust the temperature to 250
°
C (482
°
F) or
below for idling. Failure to do so, and leaving the soldering iron tip to
idle on a high-temperature setting will cause the accelerated aging of the
heating element, and shorten the lifespan of the heating element and tip.
5. After every operation, clean the soldering iron tip, then tin the tip with
a new layer of solder to prevent oxidization.