U.S. Solid USS-SS00002, Инструкция по эксплуатации

Страница: 8 / 20

8
program tracks and compensates the hot air gun's actual temperature
every millisecond. The hot air gun is now in the high-precision
thermostatic state.
4. When the operation is complete, place the hot air gun back to the
holder. Turn OFF the power switch (hot air), and the operation indicator
light of the hot air gun turns OFF. The hot air gun now enters cool air
mode to cool the heating element. When the temperature drops below
100
°
C/212
°
F, the hot air gun temperature display turns OFF. If the station
is not in use for an extended period, turn OFF the station's power switch
and DISCONNECT the station's power.
1. Connect the soldering iron handle to the station, and place the
soldering iron into the iron holder.
2. Turn ON the power switch, then turn ON the soldering station power
switch. The soldering station's heating element will begin heating
normally, and the station's operation indicator light (the dot located at the
Soldering Station