For questions please contact the US Distributor for this item
US Distributor: 1-800-209-4177
Application Type
Notes
Welding
If induction welding non-metallic
workpieces, will need to embed
in metal or use metal coating for
proper heating.
Brazing
Be sure to use flux to protect the
surfaces being brazed. Using
Automatic mode is particularly
helpful for brazing, as it allows for
two different currents: the heating
current, and then the retention
current.
Sealing
This can be used to seal and cap
different machines. Be aware of
the type of metal being used in
the seal.
Hardening
Many metals can be heat treated
to induce hardening. Most often
this process requires quenching
right after heating, so have a
quenching station available.
Annealing
Some heat treated metals actually
end up softer. This is true of brass.
Be aware of the type of metal you
are heat treating as they can have
different end results.
Soldering
Much like brazing, clean the sur-
faces to be used. Be aware solder
can melt very quickly.
X. Potential Applications
9
