NOTE: This machine is only suitable for commercial use, for example in hotels, schools, hospitals,
factories, shops and offices other than normal residential housekeeping purposes.
SWITCH PLATE
CIRCUIT
LOCATOR
LIGHT
BYPASS SWICH.
TURNS THE HEATER ON
WHEN GREEN LIGHT IS
NOT ON
1
2
3
VACUUM
ON/OFF
SWITCH
4
Record the serial number and model of your new extractor here:
(and be sure to mail your warranty card)
Serial Number: __________________ Model: KING COBRA-310 Purchase Date:_____________
Write the name and phone number of your distributor:
_____________________________________
PUMP
ON/OFF
SWITCH
RED LIGHT
INDICATES WHEN
THE HEATER IS
HEATING
SELECT CARPET
OR UPHOLSTERY
5
6
1
Inspect the machine, hoses, and cleaning tools for cleanliness and completeness.
2
Fill the solution tank with water. Using warm water may be a benefit in cleaning effectiveness, but
do not use hot water (above 140
°
F / 60
°
C) in the tank.
3
Plug in the power cords. Do not connect both cords to the same outlet; the green circuit locator
light (1) on the switch plate should light up. If the locator light does not come on, try different
outlets until it does. If you are certain the cords are on separate circuits, turn the bypass switch (4) on.
CAUTION: using the bypass switch (4) when the cords are on the same circuit may cause the
breaker in the wall to trip. NOTE: the red light (5) will turn on only when the heat exchanger is
actively heating.
OPERATION
