SKU 94932
For technical questions please call 1-800-444-3353. Page 3
8.
Use eye protection. Always wear ANSI-approved impact safety goggles when assembling
and using this product.
9.
Only use on a flat surface capable of supporting the Oil Drain Tank and its contents.
10. Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
11. Dress safely. Non-skid footwear or safey boots should be used when working with this
product. Do not wear loose clothing or jewelry as they can become caught in moving parts.
Wear a protective hair covering to prevent long hair from becoming caught in moving parts.
12. Do not allow children in the work area.
13. Do not overreach. Keep proper footing and balance at all times to prevent tripping, falling, and
injury.
14. Always secure the Wheels and Casters in place while operating the Oil Drain Tank.
15. Know and obey city and state laws for proper disposal of oil. Dispose of oil properly in
accordance with all local laws and regulations.
16. WARNING: This product contains or, when used, produces a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code 25249.5, et seq.)
17. Never leave this product unattended while operating or evacuating oil.
18. Never use this equipment near open flame or heat sources.
19. The Oil Drain Tank is to be used only for oil. Do not use for any other liquid.
Warning:
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Unpacking
When unpacking your Oil Drain Tank, check to make sure the parts listed on page 5 are included. If
any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.
Assembly
Your Oil Drain Tank will require complete assembly. It is important that you read the entire manual to
become familiar with the product BEFORE you assemble and use the Oil Drain Tank. Before
assembling and operating the Oil Drain Tank be sure that you have all parts described in the Parts
List and Assembly Diagram page 5 of this manual.
1.
Attach Upper Tube (3) to Lower Tube (4) by sliding Upper Tube (3) into Lower Tube (4)-see
Figure 1. Secure in place with Long Screw (9) as shown in Figure 1.
