SKU 94932
For technical questions please call 1-800-444-3353. Page 4
Long Screw (9)
Upper Tube (3)
Lower Tube (4)
Figure 1
2.
Attach Funnel (2) to Upper Tube (3) and secure in place with Short Screws (1).
3.
Slide Lower Tube (4) into top tube on Tank (6) as shown in Figure 2. Adjust to desired
height and tighten Adjusting Clamp (5).
Operation
1.
The Oil Drain Tank must be on a flat, secure and level surface capable of supporting the Oil
Drain Tank and its contents. Secure and block the Casters (7) in place to keep the
Casters (7) from rolling.
2.
Raise the Funnel (2) by turning and loosening the Adjusting Clamp (5) and raising the Upper
Tube (3) with Lower Tube (4) so that the Funnel (2) sits in the desired position. Lock it in
place by tightening the Knob on the Adjusting Clamp (5); turn it clockwise until tight.
3.
Drain oil into the Funnel (2) which will flow into the 8 Gallon Tank (6). Do not fill the Tank (6)
above its 8 gallon maximum capacity.
Adjusting
Clamp (5)
Lower Tube (4)
Tank (6)
To Empty the Oil
1.
Turn the knob on the Adjusting Clamp (5) to lower the Upper and Lower Tubes (3/4).
Disconnect Upper Tube, Lower Tube and Funnel (2) from the Tank (6).
2.
Place the Valve (8) so that it sits securely over a collection receptacle (not included)-see
Figure 3.
3.
Remove the Valve (8) cap and pour used oil into the collection receptacle.
WARNING! Be cautious of any splashing or spilling hot oil. Also, never leave the Oil
Drain Tank unattended when evacuating oil.
4.
When the Tank (6) is empty, replace the cap on the Valve (8).
Valve (8)
Figure 3
Figure 2
