SKU 66974
For technical questions, please call 1-800-444-3353.
Page 3
an increased risk of electric shock if
your body is grounded.
do not expose tools to rain or wet
c.
conditions.
Water entering a tool
will increase the risk of electric shock.
do not abuse the cord. never use
d.
the cord for carrying, pulling or
unplugging the Compressor. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged
or entangled cords increase the risk
of electric shock.
if operating the Compressor in a
e.
damp location is unavoidable, use
a ground Fault Circuit interrupter
(gFCi) protected supply.
Use of
a GFCI reduces the risk of electric
shock.
do not use an extension cord with
f.
this product.
Personal safety
3.
Stay alert, watch what you are do-
a.
ing and use common sense when
operating this Compressor. do
not use this Compressor while you
are tired or under the influence of
drugs, alcohol or medication.
A
moment of inattention while operating
tools may result in serious personal
injury.
use personal protective equip-
b.
ment. always wear eye protection.
Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropri-
ate conditions will reduce personal
injuries.
Prevent unintentional starting.
c.
ensure the on/off lever is in the
off-position before connecting to
power source or moving the Com-
pressor.
do not overreach. Keep proper
d.
footing and balance at all times.
This enables better control of the tool
in unexpected situations.
dress properly. do not wear loose
e.
clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts.
Loose clothes,
jewelry or long hair can be caught in
moving parts.
only use safety equipment that
f.
has been approved by an appropri-
ate standards agency.
Unapproved
safety equipment may not provide
adequate protection. Eye protection
must be ANSI-approved and breath-
ing protection must be NIOSH-ap-
proved for the specific hazards in the
work area.
tool use and care
4.
do not force the tool. use the
a.
correct tool for your application.
The correct tool will do the job better
and safer at the rate for which it was
designed.
do not use the tool if the switch
b.
does not turn it on and off.
Any
tool that cannot be controlled with
the switch is dangerous and must be
repaired.
disconnect the plug from the
c.
power source of the Compressor
before making any adjustments,
changing accessories, or storing
tools.
Such preventive safety mea-
sures reduce the risk of starting the
tool accidentally.
Store idle tools out of the reach of
d.
children and do not allow persons
unfamiliar with the tool or these
instructions to operate it.
Tools are
