II. Function Introduction
2. Press [Forward] / [Backward] to check other Flash devices’ virus
→
Press
[ESC] to finish
4.3 Capacity Check
This function is to check Flash device’s real capacity and exam the Flash devices can
work or not.
Steps of check Flash device’s real capacity:
1. Plug Flash devices into duplicator
→
Select [4. Utility ]
→
Press [OK]
→
Select [4.3
Capacity Check]
→
Press [OK]
→
System analyze the Flash device’s real capacity.
2. Press
[Forward] /
[Backward] to check other Flash devices’ real
capacity
→
Press [ESC]to finish.
** Capacity check function supports asynchronous operation; you can plug in and pull out the
Flash devices to check their real capacity continuously without pressing any other buttons.
4.4 Format FAT
This function is to format Flash device. The system will format the Flash according to its
capacity automatically. If Flash capacity is above 2GB, the system will format the Flash
to FAT32, if Flash capacity is below 2GB, the format will be FAT16. During the process,
you can check each Flash device’s formatting status by pressing
[Forward] /
[Backward].
** The source port (port #1) does not execute format function.
** This format function only format Flash device to FAT 16 or 32.
Pass:0 C-Virus
Fall:1
0
Number of Flash in process
Flash with virus
Flash without virus
USB Duplicator
4. Utility
[Utility]
2. Check USB Virus
OK
OK
Pass:0 C-Virus
Fall:1
0
Forward
[#01]
SIZE:3817M
Could be Vrius!
USB Duplicator
4. Utility
[Utility]
3. Capacity Check
OK
OK
Pass:0 Capacity
Fall:1
0
Forward
[#03]
SIZE:3817M
Capacity OK
USB Duplicator
4. Utility
[Utility]
3. Capacity Check
OK
OK
Pass:0 Capacity
Fall:1
0
Forward
[#03]
SIZE:3817M
Capacity OK
8