II. Function Introduction
5. Setup
5.1 Copy Area
There are two options for copy: Only Data Area and Whole Media.
5.1.1 Only Data Area:
This function is to set the copy mode to copy data area only. It is faster than copy
whole Flash. It will automatically analyze the source Flash device’s file format.
If the format is FAT16,32/NTFS/Linux (Ext2, Ext3) which is recognizable by the
system, it will copy the data only instead of copy the whole Flash. If the format
is non-recognizable, the system will copy the whole Flash card including empty
space. For example a 2GB Flash card which is FAT32 file format and has only 50
MB of data inside, the system will only copy that specific 50MB of data, it take
only a few seconds to copy the source.
** The default setting of copy area in the system is “Only Data Area”.
5.1.2 Whole Media:
Setup the duplicator in Whole Media function, the system will copy the whole
Flash card, including the empty space and format. This function is used when you
have a Flash source which has an unknown file format or you perfer to bit by bit
copy the whole Flash no matter how big is the data size. For example a 2GB flash
card which is FAT32 file format and has only 50 MB of data inside, if you setup
“Whole Media” the system will copy whole 2GB of Flash. It will take longer time
to copy the source.
5.2 Button Beep
You can select to hear a beep or not when you press the buttons.
5.3 Language
This function is to setup the language.
11
