II. Function Introduction
4.6 Erase Content
This function is to erase Flash device’s FAT data content, it will not erase the Flash
FAT16/32 format. If format is not FAT16/32, ie. NTFS, the quick erase will not execute.
** The source port (port #1) does not execute erase function.
Steps of erasing Flash device’s content:
1. Plug Flash devices into duplicator
→
Select [4. Utility ]
→
Press [OK]
→
Select [4.6
Erase Content]
→
Press [OK]
→
System quick erase the data in Flash devices.
2. Press [Forward] /
[Backward] to check other Flash devices’ erasing
status
→
Press [ESC] to finish.
4.7 System Info.
This function is to show the basic information of this system, which includes model
number and firmware version.
4.8 System Update
This function is to update the system’s firmware version. Please save an un-zipped update
file to your Flash device (DO NOT save the file in a folder). Plugging the Flash device in
slot (port #1) and select [8 System Update], press [OK], the system will automatically
start to do the update program. When it finished, turn the system off for around 5 seconds
and then turn it on, the new firmware has been upgraded.
USB Duplicator
4. Utility
4. Utility
6. Erase Content
OK
OK
Do ERASE ALL
Confirm?
OK
Pass:2
Q. ERASE
Fall:0
0
USB 1-2
Ver : 2.22.2
Firmware Version
Model No.
10
[#02]
Size 3871M
Erase Complete
