11
2. Compare
The compare function checks the accuracy of copy result. Scroll to select "2. Compare",
then press "OK" to start the verification process.
3. Copy+Compare
Sequentially automates from Function 1, Copy to Function 2, then Compare.
Scroll to select "3. Copy+Compare", then press "OK" to start the automated duplication and
verification process.
4. Media Check
Note
You can set the checking range in [4. Media Check >> Setup Range].
To protect source data, the system default setting will not execute this
function on the master device.
The source port will not perform any formatting because this function
will delete the flash media’s data.
4.1 H2+Format
This function can precheck t
he 2.0 / 3.0 signal of the flash’s first, then
performs a read and
write test to determine the flash’s quality
. After H2 (Keep Format) test, the device will be
formatted back to its original format (Supports FAT16, FAT32, exFAT)..
4.2 H2+Format
This function performs a read and write test to determine the flash’s quality
. After H2 (Keep
Format) test, the device will be formatted back to its original format (Supports FAT16,
FAT32, exFAT).
4.3 H2
This function performs a read and write test to determine the flash’s quality
. After H2
(Overwrite) test, the device will contain H2 files which can be verify again through
computer’s software if necessary.
