U-Reach BD18 SERIES, Руководство пользователя

Страница: 24 / 36

Chapter 4. Function Operation
24
⃝ Skip Read Error: You can set this function enable to skip disc errors in order to
avoid bad quality of copy. If you are confident of your source disc has only a
small and insignificant error due to physical damages and can be overlooked,
you can set NO to disable this function.
⃝
Change Bad Master: This setting will make the system eject source disc and
ask for another one while the source disc is unreadable for system.
⃝
CD Overburn: The majority of discs have a small margin of extra groove at the
outer edge. This setting allows you to copy data over the normal size limit.
⃝ Show HDD Image Name: You can select to show HDD image name or capacity
on Copy, Test, Copy + Compare and Compare function.
⃝
Keep Buffer: You can set Yes to load source disc to buffer in first round of Copy,
Test, Compare or Copy+Compare, and do it again without the source disc. Or
you can set No to keep buffer not be used.
⃝
Boot Password: This setting allows you to enable or disable the user
administrative password. Users have to login when the system is booted on.
⃝
Setup Password: You can set up password by pressing / to select the
number you like and press to set next number.
8-10. Count Password
to set up the counter password.
Skip Read Error can not fix the error in the source disc, all it does is skipping the
errors and keeps copying the rest of readable data.
When you change the source from drive to HDD, the LCD will show the HDD
information. How to change your source reader please refer to 6.Select Source, page
11.
The source will be only temporary saved in buffer, there will be nothing left when you
exit the task (Copy, Test, Compare and Copy+Compare or reboot the system.