U-Reach BD18 SERIES, Руководство пользователя

Страница: 13 / 36

Chapter 4. Function Operation
13
1. Copy
It is important to make sure that your source disc is placed in the right drive. You
can check or select your source reader by 6.Select Source. (plase refer to 6.Select
Source, page 17)
1 Select 1.Copy and place source disc and blank discs into the proper trays.
Then the system will detect the source disc and show the information.
2 Press to start copy.
3 Once the copy task is finished, the copied discs will be ejected and the result of
copy task will show on the LCD:
If HDD is selected to be the source reader, you have to upload the source to the
built-in HDD and then follow copy process to do your copy task. How to upload
data from disc to HDD please refer to 9-2.Disc to Image, page 27.
Q'ty of target disc
Data size
Elapsed time
Q'ty of target disc
Q'ty of target
Copy process %
Data size
Speed of burning
Due to default setting of auto start time, the duplicator will start to copy automatically
within a few seconds. You can set "OFF" to close the auto start function or set a
longer waiting time. The default setting is 5 seconds. (About this setting please refer
to 8-1.Auto Start Time, page 23 )
The default setting of source reader is the first drive.