USER GUIDE
u-line.com
Cleaning
9. Remove tap head from tower with supplied tap head wrench. Disassemble, and place all the parts in drainage bucket.
10. Add washer and attach cleaning pump connector to tower. Tighten with tap head wrench.
11. Pump all the solution through the beverage line.
13. Rinse out and refill plastic jar with clean water. Pump all the water through the beverage line to rinse.
14. Rinse all disassembled parts with clean water.
15. Reassemble tap head and reconnect CO
2
and beverage lines.
12. Allow tap coupler and tap head to soak in drainage bucket and then use tap head brush to clean tap head.
Disassembled Tap Head
32
