PAGE 1 OF 9
0322 IH-9996
1-800-295-5510
uline.com
LED WALL PACK
H-9996
PARTS
SAFETY
WARNING! This product may present a shock or
fire hazard if improperly installed or attached
in any way. Product should be installed in
accordance with these instructions, current
electrical codes and/or the current National
Electric Code (NEC).
CAUTION! Ensure supply voltage is the same as
the rated luminaire voltage. Do not operate in
ambient temperatures above those indicated
on the luminaire nameplate. Do not install
where operating temperatures exceed
ambient temperature range. To avoid the risk
of fire, explosion or electric shock, this product
should be installed, inspected and maintained
by a qualified electrician only in accordance
with all applicable electrical codes. Be certain
electrical power is off before and during
installation and maintenance.
For supply connections, use wire rated for at least 194°F.
NOTE: Input is 120-277VAC.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
LED Wall Pack x 1
Plastic Anchor x 3
Wire Nut x 3
Mounting Screw x 3
TOOLS NEEDED
Drill
Phillips Screwdriver
Drill Bit
